Home Android Download Stock Firmware of Galaxy S8 and Galaxy S8 Plus &...

[How to] Download Stock Firmware of Galaxy S8 and Galaxy S8 Plus & INSTALL

0
SHARE
[Updated] Samsung biggest flagship Galaxy S8 and S8 Plus are official few weeks back and now everywhere they are sharing Galaxy S8 Tips & Tricks! We also shared Samsung S8 Drivers and today we share the Stock Firmware for Galaxy S8 and Galaxy S8 Plus. The main advantage of stock firmware is to get back your device to the original state after rooting just by flashing the stock firmware on Galaxy S8/Plus. This post is all about Download Stock Firmware of Galaxy S8 and Galaxy S8 Plus to Unroot, Unbrick, Fix Bootloop, Screen Freezing, Downgrade and to fix more uncommon issues.

Do Check:

If you want to know how to download and install Official Stock Firmware of Galaxy S8 and Galaxy S8 Plus, then this post will help you a bit! We shared the free download Stock Firmware of Galaxy S8 and Galaxy S8 Plus devices. Just follow the below-mentioned steps to get started to install stock firmware on Samsung Galaxy S8 devices.

Download Stock Firmware of Galaxy S8 and Galaxy S8 Plus

Download Stock Firmware of Galaxy S8 and Galaxy S8 Plus

As mentioned earlier, the main advantage of this stock firmware, if you face any issues like unresponsive touch, boot loop, screen freezing, camera fail then you can factory reset or just download and install Stock Firmware of Galaxy S8 and Galaxy S8 Plus. Just by flashing or Install stock Firmware on Galaxy S8, all the issues like stuck in the welcome screen, boot loop, screen freeze, unblock your phone can be fixed easily in no time. The Galaxy S8 Stock Firmware is available for free to use and you can download just by selecting the exact region of your device.

This post is all about how to download and install Stock Nougat Firmware on Galaxy S8 and Galaxy S8 Plus. Which means you can Download Stock G955USQU1AQDE Galaxy S8 Plus SM-G955U Firmware for all region like USA (T-Mobile), US Cellular and other networks too!

Benefits of Galaxy S8 Stock Firmware

  • Downgrade your S8/Plus device if you don’t like the new update.
  • You can Upgrade to newer version of Android O in future.
  • Fix Bootloop Issues on your Galaxy S8 & S8 Plus devices.
  • You can Unroot Galaxy S8/Plus device can get back the warranty.
  • Unbrick Samsung Galaxy S8 device easily.
  • You can Revert Galaxy S8 back to Stock or Factory Reset easily.

Prerequisites

  • This method works only on Galaxy S8 and Galaxy S8 Plus.
  • Requires Root Access.
  • Your device must have 50-60% charged.
  • Take a full backup of your data.

Download Stock Firmware of Galaxy S8 and Galaxy S8 Plus

How to Install Stock Firmware on Galaxy S8 and Galaxy S8 Plus

Method 1: Flash Boot IMG via ODIN

  • Go to Settings from your device and then enable the USB Debugging and OEM unlock options, which can be found under the Developer Settings. You can enable Developer Settings by going to Settings>About Phone and then tap Build Number 7 times continuously.

odin

  • Run the ODIN tool on your PC that you downloaded above.
  • Power OFF your Smartphone and then boot it into the Download Mode by pressing and holding the Volume Down+Power+Home buttons.
  • Connect your Samsung Galaxy S8 or Galaxy S8 Plus device to the PC.

odin

  • After you connect the device, the ODIN tool will register the port number as shown below. The port number will be different from device to device.

odin

  • Click on the “AP” button from the ODIN tool and select the firmware file that you downloaded earlier on your PC.
  • From the checkboxes under “options”, make sure that only “Auto Reboot” and “F. Reset Time” has been ticked.

odin

  • Click the “Start” button towards the right bottom of the display.
  • Wait for the installation of the firmware to complete and the “Pass” message to appear.

odin

  • Your Samsung Galaxy S78/Plus will now reboot.
  • Once the reboot completes successfully, disconnect your Samsung Galaxy S8/S8 Plus from the PC.
  • That’s it! You’re done!

Method 2: Using ADB and Fastboot

  • Download ADB and Fastboot from above and extract it.
  • Connect your mobile to your PC and run CMD.
  • Enter the below commands and hit enter.
Root.bat
  • It will begin the installation, just wait for a while.
  • Once the insulation process gets over, reboot your system.
  • That’s it, enjoy!

To check whether the installation took place correctly, you can check the Android version on your Samsung Galaxy S8/S8 Plus by checking it under the “About Phone” section in Settings.

Note: – First Time It Takes 5-10 Minutes To Boot.

Hope this post is helpful on How to Download and Install Stock Firmware of Galaxy S8 and Galaxy S8 Plus by following the simple procedures shared above. If you love, do share this post with your friends and your views in comments below.

Stay tuned for more updates on Stock Firmware of Galaxy S8 and Galaxy S8 Plus 🙂